Molybdenum bronze

In chemistry, molybdenum bronze is a generic name for certain mixed oxides of molybdenum with the generic formula where A may be hydrogen, an alkali metal cation (such as Li⁺, Na⁺, K⁺), and Tl⁺. These compounds form deeply coloured plate-like crystals with a metallic sheen, hence their name. These bronzes derive their metallic character from partially occupied 4d bands. The oxidation states in K_0.28MoO₃ are K⁺¹, O^{2−}, and Mo^+5.72. MoO₃ is an insulator, with an unfilled 4d band.

These compounds have been much studied since the 1980s due to their markedly anisotropic electrical properties, reflecting their layered structure. The electrical resistivity can vary considerably depending on the direction, in some cases by 200:1 or more. They are generally non-stoichiometric compounds. Some are metals and some are semiconductors.

Preparation

The first report of a "molybdenum bronze" was by Alfred Stavenhagen and E. Engels in 1895. They reported that electrolysis of molten and gave indigo-blue needles with metallic sheen, which they analysed by weight as . The first unambiguous synthesis of alkali molybdenum bronzes was reported only in 1964, by Wold and others. They obtained two potassium bronzes, "red" and "blue" , by electrolysis of molten + at 550 °C and 560 Ã‚°C, respectively. Sodium bronzes were also obtained by the same method. It was observed that at a slightly higher temperature (about 575 Ã‚°C and above) only is obtained.

Another preparation technique involves crystallization from the melt in a temperature gradient. This report also called attention to the marked anisotropic resistivity of the purple lithium bronze and its metal-to-insulator transition at about 24 K.

Hydrogen bronzes were obtained in 1950 by Glemser and Lutz, by ambient-temperature reactions. The hydrogen in these compounds can be replaced by alkali metals by treatment with solutions of the corresponding halides. Reactions are conducted in an autoclave at about 160 Ã‚°C.

Classification

Molybdenum bronzes are classified in three major families:

• Red bronzes with limiting composition , that is, :
• Lithium molybdenum red bronze Reau and others.
• Potassium molybdenum red bronze or
• Cesium molybdenum red bronze
• Potassium molybdenum red bronze a semi-conductor.
• Blue bronzes, with limiting composition , that is, . Their electronic properties generally do not depend on the metal A.
• Potassium molybdenum blue bronze or
• Rubidium molybdenum blue bronze
• Thallium molybdenum blue bronze
• Purple bronzes, generally with limiting formula . Their electronic properties depend strongly on the metal A.
• Lithium molybdenum purple bronze
• Sodium molybdenum purple bronze
• Potassium molybdenum purple bronze
• Rubidium molybdenum purple bronze
• Thallium molybdenum purple bronze

The hydrogen molybdenum bronzes have similar appearances but different compositions:

• Hydrogen molybdenum orthorhombic blue bronze , 0.23 < x < 0.4
• Hydrogen molybdenum monoclinic blue bronze , 0.85 < x < 1.4
• Hydrogen molybdenum red bronze , 1.55 < x < 1.72
• Hydrogen molybdenum green bronze or .

Other molybdenum bronzes with anomalous electrical properties have been reported, which do not fit in these families. These include

• Tetragonal
• .

See also

Notes

References