The Williams FJ44 is a family of small, two-spool, turbofan engines produced by Williams International for the light business jet market. Until the recent boom in the very light jet market, the FJ44 was one of the smallest turbofans available for civilian applications. Although a Williams design, Rolls-Royce was brought into the project at an early stage to design, develop, and manufacture an air-cooled high-pressure (HP) turbine for the engine. The FJ44 first flew on July 12, 1988 on the Scaled Composites/Beechcraft Triumph aircraft.
The Williams FJ33 is a newer, smaller engine based on the basic FJ44 design.
Production started in 1992 with the thrust FJ44-1A. The FJ44-1C is derated to . The uprated to FJ44-2A was introduced in 1997. The thrust FJ44-3A was introduced in 2004. In 2005, a new low end version, the FJ44-1AP, was introduced, with a takeoff thrust. Released in 2007 was the new thrust FJ44-4. In 2010 this engine was in use on the Cessna CJ4, and since 2018 also on the new Pilatus PC-24.
The FJ44-1A has a single stage blisk fan plus a single intermediate pressure (IP) booster stage, both driven by a 2 stage low pressure (LP) turbine, and supercharging a single stage centrifugal high pressure (HP) compressor, driven by a single stage uncooled high pressure (HP) turbine. The combustor is an impingement cooled annular design. Fuel is delivered to the combustor through an unusual rotating fuel nozzle system, rather than the standard fuel-air mixers or vapourisers. The bypass duct runs the full length of the engine. The FJ44-2A has two additional booster compressor stages.