A wheel truing stand is a specialized tool for "truing" (straightening) bicycle wheels. Individual models differ slightly, but all consist of an axle stand on which the wheel can rotate and calipers, to measure slight deviations of the wheel's rim from ideal alignment. Proper wheel alignment includes lateral, radial and dish/centering trues which keep the wheel straight and strong. The stand is used in conjunction with an appropriately sized spoke wrench to loosen or tighten the spokes that connect the wheel's hub to the rim.
All types of wheel trues are necessary when keeping a wheel strong. Proper spoke tensions will help a wheel snap back to true if under specific load.
All wheels are measured by KGF or Kilogram - force. For rear wheel truing the rear wheel is going to have tighter spoke on the drive side while when truing front wheels the brake side spokes are going to be tighter than the drive side spokes.
Along with the wheel truing stand there are other tools that are involved in straightening bicycle wheels. Some of these tools are listed below.
These truing stands use many different kinds of materials to achieve similar quality as ones found in a shop. These materials can include wood, old wheel forks, and metal rails. While cost effective, these wheels are often not as precise as wheels made by a well-known bike tool manufacturers.
High-quality truing stands are necessary for the professional industry. High-quality truing stands allow the user for fast and easy accessibility when truing a wheel. Professional truing stands enable the tools to be used more accurately when measuring all types of truing methods. Not only do professional truing stands accommodate accuracy, but they can also hold a wide variety of wheel sizes ranging from 12â³ wheels to 29â³ wheels.