The SIG MCX Spear (stylized as MCX-SPEAR) is a multi-caliber rifle developed by the American division of SIG Sauer for the NGSW program. The SIG MCX Spear is based on SIGâÂÂs previous submission for the CSASS program (SIG MCX-MR), it is primarily chambered in .277 Fury, and is also available in 7.62ÃÂ51mm NATO and 6.5mm Creedmoor. Switching calibers can be done by swapping the barrel and magazine.
In January 2019, the United States military began the Next Generation Squad Weapon Program to find replacements for the M4 carbine and M249 Squad Automatic Weapon. In September 2019, SIG Sauer submitted their designs. The XM7 rifle was designed to fire the 6.8ÃÂ51mm SIG Fury cartridge in response to concerns that improvements in body armor would diminish the effectiveness of common battlefield rounds such as the 5.56ÃÂ45mm NATO (used in the M4 and M249 SAW) and 7.62ÃÂ51mm NATO. The decision to make the Spear available to the public was criticized by some anti-gun and law enforcement groups.
In January 2022, the SIG MCX-Spear was released on the civilian market.
On April 19, 2022, the United States Army awarded a 10-year contract to SIG Sauer to produce the M7 rifle, along with the M250 light machine gun, to replace the M4 carbine and M249 Squad Automatic Weapon, respectively.
The U.S. Army's push to procure a new caliber was largely driven by the underwhelming effectiveness of the 5.56ÃÂ45mm NATO cartridge in long-range combat against insurgents from Afghanistan, and the need for overmatch against Chinese and Russian body armor. The M4 carbines and M249 SAWs chambered in 5.56ÃÂ45mm NATO did not have the firepower to effectively engage in long-range firefights. The 7.62ÃÂ51mm NATO cartridge was also found inadequate, which led to the development of a new caliber. SIG Sauer developed the .277 Fury cartridge to maintain higher muzzle velocity over longer distances, which allows for more accurate longer-range shot placement.
The SIG MCX-Spear was SIG Sauer's submission for the United States Army Next Generation Squad Weapon (NGSW) program, chambered in .277 Fury cartridge. Sig Sauer was chosen as the winner on April 19, 2022, designating the rifle as the XM5, then re-designated as the XM7 in U.S. military service. It was later officially adopted by the US Army as the M7 rifle. A product improved carbine variant was later developed by SIG and is currently being tested, designated as the XM8 carbine.
The SIG MCX Spear DMR is a variant that features a folding skeletonized stock.
SIG MCX-Spear was released on the civilian market in 2022 with a starting MSRP of $4,999. The rifles are not compliant with California firearm regulations.
The SIG MCX-MR (Mid Range) was SIG Sauer's unsuccessful submission for the United States Army's Compact Semi-Automatic Sniper System (CSASS) program. It is chambered in 7.62ÃÂ51mm NATO and has selective fire capabilities. It weighs and features a 416 stainless steel barrel with a 1:10 inch twist rate, which is manufactured by Bartlein Barrels. The gas system features suppressed and unsuppressed settings. Unlike the handguard of the MCX, which slides off after pulling the front pivot pin, the MCX-MR requires the removal of two screws first. It features both an M16/AR-15 type charging handle and a left side charging handle. It uses a 20-round magazine and is also compatible with SR-25 lower receivers for use of SR-25 box magazines.
The SIG MCX Raptor is a short-barreled rifle prototype intended to serve as a carbine, featuring an barrel and a Picatinny rail tail interface for attaching either a compact buttstock or a folding PCB (pistol contour brace). It is available in .277 Fury, 6.5 Creedmoor and 7.62ÃÂ51mm NATO.