In the case of finite deformations, the PiolaâÂÂKirchhoff stress tensors (named for Gabrio Piola and Gustav Kirchhoff) express the stress relative to the reference configuration. This is in contrast to the Cauchy stress tensor which expresses the stress relative to the present configuration. For infinitesimal deformations and rotations, the Cauchy and PiolaâÂÂKirchhoff tensors are identical. Whereas the Cauchy stress tensor relates stresses in the current configuration, the deformation gradient and strain tensors are described by relating the motion to the reference configuration; thus not all tensors describing the state of the material are in either the reference or current configuration. Describing the stress, strain and deformation either in the reference or current configuration would make it easier to define constitutive models (for example, the Cauchy Stress tensor is variant to a pure rotation, while the deformation strain tensor is invariant; thus creating problems in defining a constitutive model that relates a varying tensor, in terms of an invariant one during pure rotation; as by definition constitutive models have to be invariant to pure rotations). The 1st PiolaâÂÂKirchhoff stress tensor, is one possible solution to this problem. It defines a family of tensors, which describe the configuration of the body in either the current or the reference state.
The first PiolaâÂÂKirchhoff stress tensor, , relates forces in the present ("spatial") configuration with areas in the reference ("material") configuration.
where is the deformation gradient and is the Jacobian determinant. In terms of components with respect to an orthonormal basis, the first PiolaâÂÂKirchhoff stress is given by
Because it relates different coordinate systems, the first PiolaâÂÂKirchhoff stress is a two-point tensor. In general, it is not symmetric. The first PiolaâÂÂKirchhoff stress is the 3D generalization of the 1D concept of engineering stress. If the material rotates without a change in stress state (rigid rotation), the components of the first PiolaâÂÂKirchhoff stress tensor will vary with material orientation. The first PiolaâÂÂKirchhoff stress is energy conjugate to the deformation gradient. It relates forces in the current configuration to areas in the reference configuration.
The second PiolaâÂÂKirchhoff stress tensor, , relates forces in the reference configuration to areas in the reference configuration. The force in the reference configuration is obtained via a mapping that preserves the relative relationship between the force direction and the area normal in the reference configuration.
In index notation with respect to an orthonormal basis,
This tensor, a one-point tensor, is symmetric. If the material rotates without a change in stress state (rigid rotation), the components of the second PiolaâÂÂKirchhoff stress tensor remain constant, irrespective of material orientation. The second PiolaâÂÂKirchhoff stress tensor is energy conjugate to the GreenâÂÂLagrange finite strain tensor.