The Mikoyan-Gurevich PBSh-1 () was a proposed attack aircraft designed in the Soviet Union.
Design work of the PBSh-1 began in January 1940, with the preliminary design by N. Z. Matyuk being approved on 24 July of that year. The aircraft was to have an cantilever inverted gull wing in a low-wing configuration and was to be powered by either a single Mikulin AM-37 or Mikulin AM-38 engine. The engine, single-seat cockpit, as well as other sensitive parts would have been protected by armor plating weighing a total of â about 30% of the aircraft's weight â which would be integrated into the aircraft's structure. The center fuselage and wing section were to be of welded steel-tube construction, while the outer wing panels and rear fuselage were to be wooden. The aircraft was to have conventional landing gear, with the main gear being directly inspired by that of the I-220. Armament was to consist of two Volkov-Yartsev VYa-23 cannons and six ShKAS machine guns; all firing outside the propeller arc. The bomber variant would also be capable of carrying a wide variety of demolition or incendiary bombs inside the fuselage bay, plus two bombs under the wings for dive bombing. Work on the PBSh-1 ended as soon as the competing Ilyushin Il-2 was approved for production.
With the cancellation of the PBSh-1, OKB Mikoyan and Gurevich began work on a derivative designated PBSh-2 in July 1940. Unlike its predecessor, the PBSh-2 was to be a biplane, specifically a reverse sesquiplane, with the designers reasoning that biplanes were easier to fly and offered better maneuverability and stability than a monoplane. The large lower wing was to have light dihedral, large ailerons, and two-segment flaps. The smaller upper wing was to be mounted on top of the canopy and have a 12 degree forward sweep. Both wings were to be braces by I-type struts. The engine, center wing section, armor, armament, landing gear, and cockpit would have been identical to the PBSh-1, apart from a jettisonable side door for the pilot. By the end of 1940, all work on the PBSh-2 was canceled due to the lack of available factories to produce the aircraft.