A lattice tower, or truss tower, is a freestanding vertical framework tower. This construction is widely used in transmission towers carrying high-voltage electric power lines, in radio masts and towers (both self-radiating towers and those that support aerials) and in observation towers. Its advantage is good shear strength at a much lower weight than a tower of solid construction would have as well as lower wind resistance.
In structural engineering, the term lattice tower is used for a freestanding structure, while a lattice mast is a guyed mast supported by guy lines. Lattices of triangular (three-sided) cross-section are most common, particularly in North America. Square (four-sided) lattices are also widely used and are most common in Eurasia. A lattice towers is often designed as either a space frame or a hyperboloid structure.
Before 1940, they were used as radio transmission towers especially for short and medium wave. Occasionally lattice towers consisting of wood were utilized. The tallest wooden lattice tower was at Mühlacker, Germany. It had a height of and was built in 1934 and demolished in 1945. Most wood lattice towers were demolished before 1960. In Germany, the last big radio towers consisting of wood were the transmission towers of the Golm transmitter and the transmitter Ismaning. They were demolished in 1979 and 1983 respectively.
The tallest free-standing lattice tower is the Tokyo Skytree, with a height of . The Petronius Compliant Tower is the tallest supported lattice tower at , being partially submerged. The city most renowned for lattice towers is Cincinnati, Ohio, which features four towers above in height. Tokyo is the only other city in the world that has more than one above that height.
The majority of the tallest steel lattice towers in the world are actually built in water and used as oil platforms. These structures are usually built in large pieces on land, most commonly in Texas or Louisiana, and then moved by barge to their final resting place. Since a large portion of these towers is underwater, the official height of such structures is often held in dispute. The steel lattice truss for these structures, known as jackets in the oil industry, are typically far more robust and reinforced than their land-based counterparts, sometimes weighing more than 50,000 tons as is the case for the Bullwinkle and Baldpate platforms, whereas tall (above 300 m) land-based lattice towers range from a high of 10,000 tons as is the case in the Eiffel Tower to as low as a few hundred tons. They are built to a higher standard to support the weight of the oil platforms built on top of them and because of the forces to which they are subjected. As a result, the cost to build these structures can run into the hundreds of millions. These costs are justified due to the resulting oil and gas revenues, whereas land-based towers have a much lower stream of revenue and therefore the capital costs of towers are typically much less.
Since end of the 19th century, tall lattice towers were built. Lattice towers have even held the absolute height record. They are among the tallest free-standing architectural structures and hold a number of national records, such as the tallest free-standing or even overall tallest structure of a country.
List of all supertall lattice tower structures in the world.
indicates a structure that is no longer standing.<br />
List of radio tower above in height.
indicates a structure that is no longer standing.<br /> indicates a structure that has had a change in height or has been rebuilt.
List of electrical pylons above
Tall wind turbines supported by lattice towers have been built almost exclusively in Germany, one of the first countries in the world to build widespread renewable energy infrastructure, including the worlds first supertall wind turbine currently under-construction in Schipkau, Lusatia. The total height includes the lattice tower and the wind turbine rotor at peak height.
List of wind turbines with a lattice tower above 150 m / 500 ft in height.
The majority of tall lattice chimneys in the world are located in Japan. Unlike other modern developed countries which use reinforced concrete to build tall chimneys Japan has historically used steel until recently for chimney construction.
List of lattice stacks above 150 m/492 ft in height. <br /> indicates a structure that is no longer standing.<br />
List of oil platforms with a steel jacket above 300 m / 1000 ft in height.
List of jackup rigs above in height.
List of amusement park rides that make use of a steel lattice tower above 100 m / 328 ft in height.
List of the tallest lattice towers by common(min 5) design types.
Unique lattice tower designs. Minimum height of 120 m / 400 ft. <br /> indicates a structure that is no longer standing.