The Jaguar AJ-V6 engine is a piston engine based on the Ford Duratec V6 engine. The Duratec V6 was originally designed by Porsche, under contract to Ford, using a proprietary Cosworth cylinder head design to meet Ford's design brief. One notable addition is the use of variable valve timing, a feature also shared with Mazda's version of the engine. It is available in , and displacements.
The AJ-V6 engine has an aluminium engine block. Its aluminium DOHC cylinder heads were designed by Jaguar Cars. Using sequential fuel injection, it has 4 valves per cylinder with VVT; fracture-split forged powder metal connecting rods; one-piece cast camshaft; and direct-acting mechanical bucket (DAMB) tappets — features that differentiate the AJ-V6 from the Ford and Mazda versions.
The AJ20 version has an bore and stroke, and displaces . Although it displaces nearly 2.1-litres, it is marketed as a "2.0". It produces and . The compression ratio is 10.75:1.
This engine is used in the following vehicles:
The AJ25 displaces . It shares the AJ20's bore and is stroked to , the same as the AJ30. It delivers at 6800 rpm with of torque at 3000 rpm with 10.3:1 compression.
This engine is used in the following vehicles:
The AJ30 has an bore and shares the AJ25's stroke, giving a displacement of . In the X-Type, the engine produces and . The Jaguar XF debuted a refined version of the AJ30 with continuously variable cam-phasing and variable geometry air intakes to increase power and broaden the powerband up to its 6800 rpm redline.
This engine is used in the following vehicles: