The Historical PZL P.11c is an American homebuilt aircraft that was designed and produced by Historical Aircraft Corporation of Nucla, Colorado. The aircraft is a 66% scale replica of the Polish PZL P.11c fighter and when it was available was supplied as a kit for amateur construction.
The aircraft features a strut-braced high-wing, a single-seat open cockpit with a windshield, fixed conventional landing gear and a single engine in tractor configuration.
The aircraft is made from welded steel tubing and wood, with its flying surfaces covered in doped aircraft fabric. Its span wing employs a NACA 2412 airfoil and has a wing area of . The cockpit width is . The standard engine used is the CAM 100 four stroke powerplant.
The aircraft has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for the pilot and baggage is .
The kit included prefabricated assemblies, the engine and scale fixed pitch propeller, basic VFR instruments, fabric and even paint. Also included were replica 7.9 mm machine guns and a ring gun site. The manufacturer indicated that the design was intended for novice builders and estimated the construction time from the supplied kit as 1400 hours.