Glock (; stylized as GLOCK) is a brand of polymer-framed, short-recoil-operated, locked-breech semi-automatic pistols (as well as some rifles and one machine pistol) designed and produced by Austrian manufacturer Glock GmbH. The firearm, designed by company founder Gaston Glock (1929âÂÂ2023), entered Austrian military and police service in 1982 as the P80 (later known commercially as the Glock 17) after outperforming established competitors in reliability and safety tests. Despite initial market resistance to its "plastic" construction, the Glock became the first commercially successful line of pistols with a polymer frame.
The weapon utilizes the company's proprietary "Safe Action" system, which consists of three independent internal safety mechanisms: the trigger safety, the firing pin safety, and the drop safety. These mechanisms prevent accidental discharge without an external on-off switch. The pistols are also noted for their high magazine capacity relative to their weight and their resistance to corrosion, originally achieved through a ferritic nitrocarburizing surface treatment known as Tenifer.
Glock pistols have become the company's most profitable line of products. They are supplied to national armed forces, security agencies, and police forces in at least 48 countries, including the Federal Bureau of Investigation (FBI) and the majority of police agencies in the United States. The product line has evolved through six generations of design changes ("Gen 1" through "Gen 6"). It is available in a wide variety of calibers, including 9ÃÂ19mm Parabellum, .40 S&W, 10mm Auto, and .45 ACP, as well as various sizes ranging from the full-sized Glock 17 to the subcompact Glock 26 and "slimline" Glock 43.
The widespread adoption of the design has made the Glock rise in popularity and a subject of gun control debates. In the 2020s, the pistols faced scrutiny regarding the proliferation of "Glock switches," illegal aftermarket auto sears that convert the firearms into machine pistols. This led to lawsuits filed by the states of Minnesota and New Jersey in 2024, and legislation in California in 2025 (Assembly Bill 1127), aimed at forcing design changes to prevent such conversions. In October 2025, Glock announced a major "right-sizing" initiative, ceasing production of over thirty variants to streamline manufacturing and introduce redesigned components to mitigate full-auto conversion.
The company's founder and head engineer, Gaston Glock (1929âÂÂ2023), had no experience in firearms design or manufacture when his first pistol, the Glock17, was being prototyped. Glock had extensive experience in advanced synthetic polymers, which was instrumental in the company's design of the first commercially successful line of pistols with a polymer frame. Glock introduced ferritic nitrocarburizing into the firearms industry as an anticorrosion surface treatment for metal gun parts.
In 1980, the Austrian Armed Forces announced that it would seek tenders for a new, modern duty pistol to replace their World War IIâÂÂera Walther P38 handguns. The Federal Ministry of Defence of Austria formulated a list of 17 criteria for the new generation service pistol, including requirements that it would be self loading; fire the NATO-standard 9ÃÂ19mm Parabellum round; the magazines would not require any means of assistance for loading; not be subject to accidental discharge from shock, strike, and drop from a height of onto a steel plate. After firing 15,000 rounds of standard ammunition, the pistol was to be inspected for wear. The pistol was to be then used to fire an overpressure test cartridge generating . The normal maximum operating pressure (P<sub>max</sub>) for the 9 mm NATO is .
Glock became aware of the Austrian Army's planned procurement, and in 1982, assembled a team of Europe's leading handgun experts from military, police, and civilian sport-shooting circles to define the most desirable characteristics in a combat pistol. Within three months, Glock had developed a working prototype that combined proven mechanisms and traits from previous pistol designs. In addition, the plan was to make extensive use of synthetic materials and modern manufacturing technologies, which led to the Glock17 becoming a cost-effective candidate.
Several samples of the Glock17 (so named corresponding to its magazine capacity or because it was the 17th patent procured by the company) were submitted for assessment trials in early 1982. After passing all of the exhaustive endurance and abuse tests, the Glock emerged as the winner. According to Friedrich Dechant, former head of the Austrian Armaments and Defence Technology Agency, the Glock P80 was clearly superior to other handguns in terms of performance, handling, charging capacity and price.
The handgun was adopted into service with the Austrian military and law enforcement in 1982 as the Pistole 80 (P80), with an initial order for 25,000 guns. The Glock17 outperformed eight different pistols from five other established manufacturers (Heckler & Koch of Germany offered their P7M8, P7M13, and P9S, SIG Sauer of Switzerland bid with their P220 and P226 models, Beretta of Italy submitted their model 92SB-F, FN Herstal of Belgium proposed an updated variant of the Browning Hi-Power, and the Austrian Steyr Mannlicher entered the competition with the GB).
The results of the Austrian trials sparked a wave of interest in Western Europe and overseas, particularly in the United States, where a similar effort to select a service-wide replacement for the M1911 had been going on since the late 1970s (known as the Joint Service Small Arms Program). In late 1983, the United States Department of Defense inquired about the Glock pistol and received four samples of the Glock17 for unofficial evaluation. Glock was then invited to participate in the XM9 Personal Defense Pistol Trials, but declined because the DOD specifications would require extensive retooling of production equipment and providing 35 test samples in an unrealistic time frame.
In 1985, after joint Norwegian and Swedish trials from 1983 to 1985, the Glock17 was accepted into service as the P80 in Norway and, in 1988, as the Pistol 88 in Sweden, where it surpassed all prior NATO durability standards. As a result, the Glock17 became a standard NATO-classified sidearm and was granted a NATO Stock Number (1005-25-133-6775). By 1992, some 350,000pistols had been sold in more than 45countries, including 250,000 in the United States alone.
Starting in 2013, the British Armed Forces began replacing the Browning Hi-Power pistol with the Glock17Gen4, due to concerns about weight and the external safety of the Hi-Power. The British preferred the Glock17Gen4 over the Beretta Px4 Storm, FN FNP, Heckler & Koch P30, SIG Sauer P226, Smith & Wesson M&P, and Steyr M9A1 of which 19 pistols each, all chambered in 9ÃÂ19mmParabellum, were entered in the R9GSP trials.
The French Armed Forces (FAF) in 2020 began replacing their MAC Mle 1950 and, to a lesser extent, their PAMAS G1 pistols with Glock17Gen5 models specifically made for the FAF. The French preferred the Glock17Gen5 over the HS2000 and CZ P-10 offerings that also made it to the final selection phase.
Glock has updated its basic design several times throughout its production history.
The first-generation (Gen 1) Glock pistols are most notably recognized by their smoother "pebble finish" grip and frame with no finger grooves. The Gen 1 frame pattern and design was used by Glock from 1982 through 1988 and pre-dates the checkered grip patterns used in the second generation of Glock pistols. The first Glock17s imported to the US were serialized with an alphanumeric (two-letter prefix followed by three numbers) stamped into the slide, barrel, and a small metal plate inserted into the bottom side of the polymer frame. The first documented Glock17s (by serial number) imported into the US were from the AF000series in January 1986, followed by AH000, AK000, and AL000. These early Glock(Gen 1) pistols (serial number prefixAF through AM) were also manufactured with a barrel that had a smaller overall diameter and thinner bore walls, later known as "pencil barrels". The barrels were later redesigned with thicker bore walls, and manufacturing continued to evolve, improving the design of Glock pistols.
Many of the first-generation Glocks were shipped and sold in the iconic "Tupperware" style plastic boxes. The earliest Glock boxes had ammunition storage compartments that allowed for 17 rounds of 9mm to be stored with the pistol. Glock later changed this box design to meet BATF import requirements, and removed the ammunition storage compartments.
A mid-life upgrade to the Glock pistols involved adding checkering to the front strap and trigger guard, and adding checkering and serrations to the back strap. These versions, introduced in 1988, were informally referred to as "second-generation" or Gen2 models. However, Glock did not mark the pistols Gen2. In 1991, an integrated recoil spring assembly replaced the original two-piece recoil spring and tube design. The magazine was slightly modified, changing the floorplate and fitting the follower spring with a resistance insert at its base.
In 1998, the frame was further modified with an accessory rail (called the "Universal Glock rail") similar to a Picatinny rail to allow the mounting of laser sights, tactical lights, and other accessories. Thumb rests on both sides of the frame, and finger grooves were added to the front strap. Glock pistols with these upgrades are informally referred to as (early) "third-generation" models. Later third-generation models additionally featured a modified extractor that serves as a loaded chamber indicator, and the locking block was enlarged, along with the addition of an extra cross pin to aid the distribution of bolt thrust forces exerted by the locking block. This cross pin is known as the locking block pin and is located above the trigger pin.
The polymer frames of third-generation models can be black, flat dark earth, or olive drab. Besides that, non-firing dummy pistols ("P"models) and non-firing dummy pistols with resetting triggers ("R"models) have a bright red frame, and Simunition-adapted practice pistols ("T"models) a bright blue frame for easy identification.
In 2009, the Glock22RTF2 (Rough Textured Frame 2) (chambered in .40 S&W) was introduced. This pistol featured new checkering on the grip and new scalloped (fish-gill-shaped) serrations on the sides of the slide. Many of the existing models became available in the RTF2version, including the 17, 31, 32, 23, 21, and 19. Some of those did not have the fish gills.
At the 2010 SHOT Show, Glock presented the "fourth generation", now dubbed "Gen4" by Glock itself. Updates centered on ergonomics and the recoil spring assembly. The initial two fourth-generation models announced were the full-sized Glock 17 and Glock 22, chambered for the 9ÃÂ19mm Parabellum and .40 S&W cartridges, respectively. The pistols were displayed with a modified rough-textured frame (RTF-4), front grip strap with finger grooves, interchangeable backstraps of different sizes, and an accessory rail. "Gen4" is on the slide next to the model number to identify the fourth-generation pistols.
The basic grip size of the fourth-generation Glock pistols is slightly smaller than that of the previous design. A punch is provided to remove the standard trigger housing pin and replace it with the longer cross pin needed to mount the medium or large backstrap that will increase the trigger distance by or . With the medium backstrap installed, the grip size is identical to that of the third-generation pistols. The magazine release catches are enlarged and reversible for left-handed use. To use the exchangeable magazine release feature, fourth-generation Glock magazines have a notch cut on both sides of the magazine body. Earlier versions of the magazines will not lock into Gen4 pistols if the magazine release button has been moved to be operated by a left-handed user. Gen4 magazines will work in older models.
Mechanically, fourth-generation Glock pistols are fitted with a dual-recoil-spring assembly to reduce perceived recoil and extend service life. Earlier subcompact Glock models, such as the Glock 26 and Glock 30, already used a dual recoil spring assembly, which was carried over to the fourth-generation versions of those models. The slide and barrel shelf have been resized, and the front portion of the polymer frame has been widened and internally enlarged to accommodate the dual recoil spring assembly. The trigger mechanism housing has also been modified to fit into the smaller-sized grip space.
The introduction of fourth-generation Glock pistols continued in July 2010 when the Glock 19 and Glock 23, the reduced size "compact" versions of the Glock 17 and Glock 22, became available for retail. In late 2010, Glock continued the introduction of fourth-generation models with the Glock 26 and Glock 27 "subcompact" variants.
In January 2013, more fourth-generation Glock pistols were introduced commercially during the annual SHOT Show, including the Glock 20 Generation 4 along with other fourth-generation Glock models.
In September 2011, Glock announced a recoil spring exchange program in which the manufacturer voluntarily offered to exchange the recoil spring assemblies of its fourth-generation pistols (except the "subcompact" Glock 26 and Glock 27 models) sold before 22 July 2011 at no cost "to ensure our products perform up to GLOCK's stringent standards", according to the company.
On 29 June 2016, the United States Federal Bureau of Investigation (FBI) awarded a contract to Glock to provide new 9ÃÂ19mm Parabellum chambered duty pistols. The solicitation specifications deviated from the specifications of Glock's fourth-generation models. Features found in the M series pistols evolved into what become Glock's Fifth Generation or Gen5 pistols.
In August 2016, the Indianapolis Metro Police Department (IMPD) started training with a batch of Glock 17M pistols. The most obvious difference with the Glock third- and fourth-generation models on published images is the omission of finger grooves on the grip. In October of that year, the IMPD issued a 17M voluntary recall following failures encountered while dry firing the pistols during training. According to Major Riddle with the IMPD, "Glock is working to correct the problem and we hope to begin issuing the new [17Ms] as soon as December."
In August 2017, Glock presented the "fifth generation" or "Gen 5". The revisions centered on ergonomics and improving reliability. Many parts of fifth-generation Glock pistols cannot be interchanged with those of the previous generations. The two fifth-generation models announced were the Glock 17 and Glock 19, chambered for the 9ÃÂ19mm Parabellum. Some conspicuous changes on the fifth-generation models are ambidextrous slide stop levers, DLC surface finish for barrel and slide, a barrel featuring a revised style of polygonal rifling (called the "Glock Marksman Barrel" by Glock), a deeper recessed barrel crown, omission of the finger grooves on the grip, a flared magazine well, and a reintroduction of a half-moon-shaped cutout on the bottom front of the grip. The locking block pin, located above the trigger pin that was introduced in the third generation, is omitted. Many internal parts were revised less conspicuously. "Gen 5" is on the slide next to the model number to identify the fifth-generation pistols. The "Gen 5" slide can feature front serrations (FS) to provide an additional tactile traction surface choice. The magazines were also revised for the fifth-generation models: the redesigned magazine floor plates feature a forward protruding lip to offer grip for manual assisted extraction, and the magazine follower became orange colored for easier visual identification.
In October 2025, Glock announced that it would cease production of more than 30 variants of its handguns. The decision was cited by Glock as a streamlining and "right-sizing" measure, but was also prompted by passage of legislation in the United States against pistols that can be easily converted to fully automatic fire (through the use of a Glock switch or other means). Only four models will remain in production, all of which are single-stack compact variants that are both popular sellers and do not suffer from the same convertibility concerns: models Glock 42, 43, 43X and 48. Glock plans to replace the discontinued models in December with "V" designations after the model numbers, which will feature redesigned trigger bars and rear plates designed to prevent the use of full-auto switches.
The Glock 17 is a short recoilâÂÂoperated, locked-breech semi-automatic pistol that uses a modified Browning cam-lock system adapted from the Hi-Power pistol. The firearm's locking mechanism uses a linkless, vertically tilting barrel with a rectangular breech that locks into the ejection port cut-out in the slide (the SIG Sauer system). During the recoil stroke, the barrel initially moves rearward, locked together with the slide about , until the bullet leaves the barrel and the chamber pressure drops to a safe level. A ramped lug extension at the base of the barrel then interacts with a tapered locking block integrated into the frame, forcing the barrel down and unlocking it from the slide. This camming action terminates the barrel's movement while the slide continues back under recoil, extracting and ejecting the spent cartridge casing. The slide's uninterrupted rearward movement and counter-recoil cycle are characteristic of the Browning system.
Glock pistols incorporate several features intended to enhance reliability under adverse conditions, such as advanced metal coatings, "stub" slide guides instead of true frame rails, and an unusual cocking mechanism in which the trigger is partially responsible for cocking the striker. By relying partially on force from the shooter's trigger finger to cock the striker, a Glock effectively reduces the load on the recoil spring as the slide moves forward into battery. In contrast, almost all other striker-fired pistols on the market rely fully on the recoil spring to cock the striker.
The slide features a spring-loaded claw extractor, and the stamped sheet metal ejector is pinned to the trigger mechanism housing. Pistols after 2002 have a reshaped extractor that serves as a loaded chamber indicator. When a cartridge is present in the chamber, a tactile metal edge protrudes slightly out immediately behind the ejection port on the right side of the slide. The striker firing mechanism has a spring-loaded firing pin that is cocked in two stages that the firing pin spring powers. The factory-standard firing pin spring is rated at , but by using a modified firing pin spring, it can be increased to or to . When the pistol is charged, the firing pin is in the half-cock position. As the trigger is pulled, the firing pin is then fully cocked. At the end of its travel, the trigger bar is tilted downward by the connector, releasing the firing pin to fire the cartridge. The connector resets the trigger bar so that the firing pin will be captured in half-cock at the end of the firing cycle. This is known as a preset trigger mechanism, referred to by the manufacturer as the "Safe action" trigger. The connector ensures that the pistol can fire only semiautomatically.
The factory-standard, two-stage trigger has a trigger travel of and is rated at , but by using a modified connector, it can be increased to or lowered to . In response to requests from American law enforcement agencies for a two-stage trigger with increased trigger pull, Glock introduced the NY1 (New York) trigger module, which features a flat spring in a plastic housing that replaces the trigger bar's standard coil spring. This trigger modification is available in two versions: NY1 and NY2 that are rated at to and to , respectively, which require about to of force to disengage the safeties and another to in the second stage to fire a shot.
The Glock's frame, magazine body, and several other components are made from a high-strength nylon-based polymer invented by Gaston Glock, called Polymer 2. This plastic was specially formulated to provide increased durability and is more resilient than carbon steel and most steel alloys. Polymer 2 is resistant to shock, caustic liquids, and temperature extremes where traditional steel/alloy frames would warp and become brittle. The injection-molded frame contains four hardened steel guide rails for the slide: two at the rear of the frame, and the remaining pair above and in front of the trigger guard. The trigger guard itself is squared off at the front and checkered. The grip has an angle of 109ð and a nonslip, stippled surface on the sides and both the front and rear straps. The frame houses the locking block, which is an investment casting that engages a 45ð camming surface on the barrel's lower camming lug. It is retained in the frame by a steel axis pin that holds the trigger and slide catch. The trigger housing is held to the frame by means of a polymer pin. A spring-loaded sheet-metal pressing serves as the slide catch, secured against unintentional manipulation by a raised guard molded into the frame. Because of its polymer construction, there were initially fears that Glock pistols would be invisible to airport X-ray machines, making them easy to illegally import into the United States. In actuality, 84% of the gun's weight is from steel, and Polymer 2 is visible to X-ray machines. The myth's prevalence is believed to be connected to a scene in Die Hard 2, which was released a few years after the Glock was invented. In 1988, the Undetectable Firearms Act was passed in the United States, banning the manufacture or import of any gun that could pass undetected through a metal detector.
The Glock pistol has a relatively low slide profile, which holds the barrel axis close to the shooter's hand, making the pistol more comfortable to fire by reducing muzzle rise and allowing faster aim recovery in rapid-fire sequences. The rectangular slide is milled from a single block of ordnance-grade steel using CNC machinery. The barrel and slide undergo two hardening processes before treatment with a proprietary nitriding process called Tenifer. The Tenifer treatment is applied in a nitrate bath. The Tenifer finish is between in thickness, and is characterized by extreme resistance to wear and corrosion; it penetrates the metal, and treated parts have similar properties even below the surface to a certain depth.
The Tenifer process produces a matte gray-colored, nonglare surface with a 64 Rockwell C hardness rating and a 99% resistance to salt water corrosion (which meets or exceeds stainless steel specifications), making the Glock particularly suitable for individuals carrying the pistol concealed as the highly chloride-resistant finish allows the pistol to endure the effects of perspiration better. Glock steel parts using the Tenifer treatment are more corrosion resistant than analogous gun parts having other finishes or treatments, including Teflon, bluing, hard chrome plating, or phosphates. During 2010, Glock switched from the salt bath nitriding Tenifer process to a not exactly disclosed gas nitriding process. After applying the nitriding process, a black Parkerized decorative surface finish is applied. The underlying nitriding treatment will remain, protecting these parts even if the decorative surface finish were to wear off.
A fourth-generation Glock 17 consists of 34 parts. For maintenance, the pistol disassembles into five main groups: the barrel, slide, frame, magazine, and recoil-spring assembly. The firearm is designed for the NATO-standard 9ÃÂ19mm Parabellum cartridge, but can use high-power (increased pressure) +P ammunition with either full-metal-jacket or jacketed hollow-point projectiles.
The hammer-forged barrel has a female type polygonal rifling with a right-hand twist. The stabilization of the round is not by conventional rifling, using lands and grooves, but rather through a polygonal profile consisting of a series of six or eight interconnected noncircular segments (only the .45 ACP and .45 GAP have octagonal polygonal rifling). Each depressed segment within the interior of the barrel is the equivalent of a groove in a conventional barrel. Thus, the interior of the barrel consists of smooth arcs of steel rather than sharply defined slots. Instead of using a traditional broaching machine to cut the rifling into the bore, the hammer forging process involves beating a slowly rotating mandrel through the bore to obtain the hexagonal or octagonal shape. As a result, the barrel's thickness in the area of each groove is not compromised as with conventional square-cut barrels. This has the advantage of providing a better gas seal behind the projectile as the bore has a slightly smaller diameter, which translates into more efficient use of the combustion gases trapped behind the bullet, slightly greater (consistency in) muzzle velocities, and increased accuracy and ease of maintenance.
The newer lines of Glock pistolsâÂÂi.e., Gen5, G42/43âÂÂare equipped with the Glock Marksmanship Barrel, or GMB. While older barrels were somewhat difficult to identify a bullet as coming from a particular barrel with high enough reliability for evidentiary use, the newer GMB ones are designed differently. A study by Stephen Christen and Hans Rudolf Jordi, published in Forensic Science International in February 2019, shows that the new GMB barrels leave more distinctive markings on the fired projectile. These marks were more easily identified than previous pistol barrel markings and were sufficient for reliably tying a bullet to a particular barrel. The study used a comparison microscope and an ABIS (Evofinder).
Glock pistols lack a traditional on-off safety lever, which Glock markets as an advantage, especially to police departments, as the user can fire immediately without separately manipulating a safety. Instead, the pistols are designed with three independent safety mechanisms to prevent accidental discharge. The system, designated "Safe Action" by Glock, consists of an external integrated trigger safety and two automatic internal safeties: a firing pin safety and a drop safety. The external safety is a small inner lever contained in the trigger. Pressing the lever activates the trigger bar and sheet metal connector. The firing pin safety is a solid, hardened steel pin that, in the secured state, blocks the firing pin channel (disabling the firing pin in its longitudinal axis). It is pushed upward to release the firing pin, firing only when the trigger is actuated and the safety is pushed up by the backward movement of the trigger bar. The drop safety guides the trigger bar in a ramp that is released only when direct rearward pressure is applied to the trigger. The three safety mechanisms are automatically disengaged one after the other when the trigger is squeezed, and are automatically reactivated when the trigger is released.
In 2003, Glock announced the Internal Locking System (ILS) safety feature named Glock Safety Lock. The ILS is a manually activated lock located in the back of the pistol's grip. It is cylindrical in design and, according to Glock, each key is unique. When activated, the lock causes a tab to protrude from the rear of the grip, providing both a visual and tactile indication of whether the lock is engaged. When activated, the ILS renders the Glock unfireable, as well as making it impossible to disassemble. When disengaged, the ILS adds no further safety mechanisms to the Glock pistol. The ILS is available as an option on most Glock pistols. Glock pistols cannot be retrofitted to accommodate the ILS. The lock must be factory-built in Austria and shipped as a special order.
The Glock 17 feeds from staggered-column or double-stack magazines that have a 17-round capacity (which can be extended to 19 with an optional floor plate) or optional 24 or 33-round high-capacity magazines. For jurisdictions that restrict magazine capacity to 10 rounds, Glock offers single-stack, 10-round magazines. The magazines are made of steel and are overmolded with plastic. A steel spring drives a plastic follower. After the last cartridge has been fired, the slide remains open on the slide stop. The slide stop release lever is located on the left side of the frame directly beneath the slide and can be manipulated by the thumb of the right-handed shooter.
Glock magazines are interchangeable between models of the same caliber, meaning that a compact or subcompact pistol will accept magazines designed for the larger pistols chambered for the same round. However, magazines designed for compact and subcompact models will not function in larger pistols because they are not tall enough to reach the slide and magazine release. For example, the subcompact Glock 26 will accept magazines from both the full-size Glock 17 and the compact Glock 19, but the Glock 17 will not accept magazines from the smaller Glock 19 or the Glock 26. The magazines for the Glock 36, the Glock 42, the Glock 43, and the Glock 44 are all unique; they cannot use magazines intended for another model, nor can their magazines be used in other models.
The first Glock pistols sent to the United States in 1985 failed to meet the BATF import "points" requirement, requiring Glock to quickly develop an which allowed for the pistols to be imported and sold commercially in 1986. It is believed that Glock designed and created this adjustable rear sight over a weekend to meet the ATF's importation requirements, and so it was dubbed the "weekend" sight. These first-generation adjustable rear sights extended past the slide and were susceptible to breaking. Even on later models, the front sight can easily become misshapen from friction against the holster, leading to replacements with metal sights, or tritium illuminated night sights.
More commonly today, the Glock 17 has a fixed polymer combat-type sighting arrangement that consists of a ramped front sight and a notched rear sight with white contrast elements painted on for increased acquisition speed â a white dot on the front post and a rectangular border on the rear notch. Some newer rear sights can be adjusted for windage (on certain models, due to the windage sights not being included as a factory default), as they have a degree of lateral movement in the dovetail they are mounted in. Three other factory rear sight configurations are available in addition to the standard height sight: a lower impact sight, and two higher impact versions â and .
The Glock pistol accessories available from the factory include several devices for tactical illumination, such as a series of front rail-mounted "Glock tactical lights" featuring a white tactical light and an optional visible laser sight. An alternative version of the tactical light, using an invisible infrared light and a laser sight, is available and designed to be used with an infrared night vision device. Another lighting accessory is an adapter that mounts a flashlight to the bottom of a magazine.
Polymer holsters in various configurations and matching magazine pouches are available. In addition, Glock produces optional triggers, recoil springs, slide stops, magazine release levers, and maritime spring cups. Maritime spring cups are designed to allow the pistol to be fired immediately after being submerged in water. They feature additional openings that allow liquids to flow and escape around them, offering enhanced reliability when water has penetrated the firing pin assembly channel.
Magazine floor plates (or +2 baseplates), which expand the capacity of the standard magazines by two rounds, are available for models chambered for the 9ÃÂ19mm Parabellum, .45 GAP, .40 S&W, .357 SIG, and .380 ACP cartridges. In addition to the standard nonadjustable polymer sight line, Glock offers three alternative sight lines. These consist of steel, adjustable, and self-illuminating tritium night rear sights and factory steel and self-illuminating tritium contrast pointer steel front sights.
The Glock 17 along with many variants can accept pistol conversion kits, with one such example being the FAB-Defense KPOS Scout. They can also accept special stocks like the Flux Defense Brace.
A Glock switch is an aftermarket accessory that depresses the firearm's sear, allowing fully automatic fire. Without the proper license, they are illegal in the United States.
Glock began producing limited edition and commemorative Glocks in 1991. Glock later produced a series of anniversary models to celebrate business milestones and in honor of 20, 25, and 30 years of US sales. Additionally, many law enforcement agencies had the department name, logo, or badges engraved on the slides of issued duty weapons.
Following the introduction of the Glock 17, numerous variants and versions have been offered. Different model numbers identify variants that differ in caliber, frame, and slide length, except for a few models with a letter suffix (the Glock 17L, 19X, 30S, and 43X).
The original double-stack "small frame" Glock pistols are made in five form factors, all modeled after the original full-sized Glock 17. "Standard" models are designed as full-sized duty firearms with a large magazine capacity. "Compact" models are slightly smaller with reduced magazine capacity and lighter weight while maintaining a usable grip length. "Subcompact" models are designed for easier carry and being lighter and shorter, are intended to be used with two fingers on the grip below the trigger guard, and lack an accessory rail like the larger, after generation two, Glock models. The other two form factors use the full-size "standard" frame with longer slides that include a lower section to fill in the space between the frame's dust cover and the front of the slide. The first of these is the "long slide" models, which were too long for certain IPSC classes, necessitating the creation of the intermediate "competition" models. Currently, the available chamberings for all five form factors are 9mm Parabellum (9ÃÂ21mm in certain countries) and .40 Smith & Wesson. Additionally, .357 SIG and .45 GAP chamberings are offered in "standard", "compact", and "subcompact" models, while .380 ACP is offered only in "compact" and "sub-compact" models. Recently, so-called "crossover" versions in 9mm Parabellum pair short (front-to-back) "compact" frames with longer "standard" grip lengths. This was initially intended to provide a longer-grip, higher-capacity version of the Glock 19 (Glock 19X and Glock 45). Still, Glock developed the Glock 47 for US Customs and Border Protection, which used the G45 frame with a G17-length slide that included a front section to fill the gap between the dust cover and the front of the slide, a design that maintains the same overall dimensions as the Glock 17. Naturally, the next step was to couple this slide with the Glock 19 Frame, creating the Glock 49.
There are also the wider double-stack "large frame" Glock pistols for use with larger calibers, currently in 10mm Auto and .45 ACP. These models have bigger, wider slides and frames and are larger than the smaller-chambered pistols. These come in only "standard", "subcompact", "competition" (.45 ACP only), and "long slide" (10mm only). Additionally, Glock introduced the "subcompact" Glock 30S in .45 ACP, fitted with the Glock 36's slimmer, lighter slide. Also, in 2007, Glock introduced a "short frame" version of these large frame weapons to provide a grip better suited to small hands. The short frame was originally designed to compete in the now-canceled U.S. military Joint Combat Pistol trials for a new .45 ACP pistol to replace the M9 pistol. Glock's entry featured an optional ambidextrous magazine release and a MIL-STD-1913 rail, along with a reduced backstrap. The Glock 21SF was originally available in three versions: one with a Picatinny rail and an ambidextrous magazine release, and two with a Universal Glock rail, available with or without the ambidextrous magazine release. However, the ambidextrous release and Picatinny rail were soon dropped. As of January 2009, the Glock 20, 21, 29, and 30 were offered in short-framed variations. These models incorporate a reduction in trigger reach, and full-sized models feature a reduction in heel depth, which corresponds to an overall reduction in length for those models. The short frame models were not introduced for the Gen 4 and Gen 5 models, as the replaceable backstraps design makes a separate short frame version redundant.
Glock also produces single-stack "slimline" models, targeting the concealed carry market. The first was introduced with Gen 3 in .45 ACP as the Glock 36. More recently, after the introduction of Gen 5, came the Glock 42 in .380 ACP, followed by the Glock 43 in 9mm Parabellum. The most recent additions to the "slimline" series, the 43X and 48, were introduced together in 9mm Parabellum. These have longer grips that allow for a full three-finger hold and a 10-round capacity. The 43X is a long grip "crossover" 43, while the 48 has a longer slide to provide a "slimline" version of the "compact" Glock 19.
Glock pistols chambered for the .45 ACP (and the .45 GAP) feature octagonal polygonal rifling rather than the hexagonal-shaped bores used for models in most other chamberings. Octagonal rifling provides a better gas seal in relatively large diameter rifled bores, since an octagon resembles a circle more closely than a hexagon.
In 1990, Smith & Wesson and Winchester developed the .40 Smith & Wesson by shortening the 10mm case. This created a round that was more powerful than the 9mm Parabellum but with more manageable recoil. The round was also still operable in the smaller frame size used for Glock 9mm models. As is typical of many pistols chambered in .40 S&W, each of the standard Glock models (22, 23, and 27) may be easily converted to the corresponding .357 SIG chambering (Glock 31, 32, and 33, respectively) simply by replacing the barrel. No other parts need to be replaced, as the .40 S&W magazines will feed the .357 SIG rounds.
The first two .380 ACP models (Glock 25 and 28) were released in 1995 to provide a less powerful alternative to the 9mm Parabellum and 9ÃÂ21mm, primarily intended for markets such as Brazil that prohibit civilian ownership of firearms chambered in more powerful calibers. Made in Austria, import restrictions ban civilian importation into the United States, but a limited Glock 28 run was manufactured in Glock's US plant for US sale. The Glock 25 and 28 are banned in Canada as they do not meet the minimum handgun barrel length requirements.
Due to the relatively low bolt thrust of the .380 ACP cartridge, the locked-breech design of the Glock 19 and Glock 26 was minimally modified for the Glock 25 and Glock 28 to implement unlocked breech operation. It operates via straight blowback of the slide. This required modifying the locking surfaces on the barrel and redesigning the former locking block. Unusual for a blowback design, the barrel is not fixed to the frame. It moves rearward in recoil until it is tilted below the slide, similar to the standard locked-breech system. The reduced size and mass of the Glock 42 allowed the return to the Glock-standard locked-breech design.
In 1994, SIG and Federal developed the .357 SIG to match the ballistics of typical .357 Magnum loads. This was done by necking down a shortened 10mm case to .357, which made it easy for Glock to alter their .40 Smith & Wesson models to the new caliber. As is typical of pistols chambered in .357 SIG, each of the standard Glock models (31, 32, and 33) may be easily converted to the corresponding .40 S&W chambering (Glock 22, 23, and 27, respectively) simply by replacing the barrel. The .357 SIG magazines differ from the .40 S&W counterpart by adding an internal rib on each side of the magazine body, with cutouts for the follower. This guides the bottlenecked cartridges through the feeding process. While it is possible to load .40 S&W into these magazines, the friction causes the larger rounds to lock up inside the magazine body, which can induce malfunctions. .40 S&W magazines do not have this feature and can load both .357 SIG and .40 S&W respectively.
Glock pistols chambered for the .45 GAP (and the .45 ACP) feature octagonal polygonal rifling rather than the hexagonal-shaped bores used for models in most other chamberings. Octagonal rifling provides a better gas seal in relatively large diameter rifled bores, since an octagon will have shorter sides and shallower angles than a hexagon.
Third-party frames and slides for Glock pistols began to appear in the early 2000s. This has led to "Glock" becoming a generic term, including pistols not made by Glock GmbH, especially as expiring patents allowed complete Glock clones to be made. Many American companies produce Glock clones.
Glock pistols have been used in mass shootings and other high-profile murders in the United States, including the 1991 Luby's shooting, the 1996 murder of Tupac Shakur, the 2007 Virginia Tech shooting, the 2011 Tucson shooting, the 2012 Aurora shooting, the 2012 Sandy Hook Elementary School shooting, the 2015 Charleston church shooting, the 2016 Orlando nightclub shooting, the 2018 Pittsburgh synagogue shooting, and the 2022 New York City Subway attack. In April 2022, Ilene Steur, a survivor of the 2022 NYC subway attack, sued Glock and its Austrian parent company for compensation for her physical injuries and emotional pain.
Glock pistols have also been used in mass shootings elsewhere in the world, including the 2001 Nepalese royal massacre, the 2002 Erfurt massacre, the 2002 Nanterre massacre, the killings committed by Viktor Kalivoda in 2005, the 2011 Norway attacks, the 2012 Bucharest hair salon shooting, the 2016 Munich shooting, the 2023 Rotterdam shootings, the 2023 Prague shootings and the 2025 Graz school shooting.
A 2014 report by the Chicago Police Department found that Glock pistols were the third most traced handgun, coming after those from Smith & Wesson and Sturm, Ruger & Co. Experts on gun control, mass shootings, and defense training have cited factors such as reliability, ease of use, and commonness for why Glock pistols are so often involved in mass shootings and other criminal acts. The criminal use of handguns, including Glocks, has led to calls for increased gun control in the United States. This common usage, however, has been described by to be a result of Glock's overall popularity and market presence in the US and that "this level of violence isn't necessarily tied to a particular[,] to a brand".
Glock pistols were singled out for restriction by some jurisdictions. They were branded the "hijacker's special" based on the false assumption that they could bypass airport metal detectors because of their polymer frame. This was refuted in Congressional hearings by the ATF, FAA, and other organizations responsible for airline security, which proved embarrassing for the ban's advocates and provided significant publicity for Glock.
In December 2024, the states of Minnesota and New Jersey sued Glock over the design of the 9-millimeter semiautomatic pistol, claiming that the company had failed to make changes to prevent the easy conversion of the pistol into an illegal and much more dangerous machine gun. The conversion is done using a small, illegal device known as a Glock switch.
On October 10, 2025, California Governor Gavin Newsom signed Assembly Bill 1127 into law, prohibiting the retail sale of new semi-automatic handguns that can be readily converted to fully automatic fire using Glock switches. The law primarily affects Glock pistols and similar designs featuring a cruciform trigger bar, and has been described as a "Glock ban." The law aims to address a perceived design flaw allowing illegal modifications, with proponents hoping to pressure manufacturers like Glock to redesign their firearms in the interest of public safety. The National Rifle Association and other gun advocacy groups filed a federal lawsuit challenging the statute soon after.