AluminiumâÂÂlithium alloys (AlâÂÂLi alloys) are a set of alloys of aluminium and lithium, often also including copper and zirconium. Since lithium is the least dense elemental metal, these alloys are significantly less dense than aluminium. Commercial AlâÂÂLi alloys contain up to 2.45% lithium by mass.
Alloying with lithium reduces structural mass by three effects:
The crystal structure for Al<sub>3</sub>Li and AlâÂÂLi, while based on the FCC crystal system, are very different. Al<sub>3</sub>Li shows almost the same-size lattice structure as pure aluminium, except that lithium atoms are present in the corners of the unit cell. The Al<sub>3</sub>Li structure is known as the AuCu<sub>3</sub>, L1<sub>2</sub>, or Pmm and has a lattice parameter of 4.01 à. The AlâÂÂLi structure is known as the NaTl, B32, or Fdm structure, which is made of both lithium and aluminium assuming diamond structures and has a lattice parameter of 6.37 à. The interatomic spacing for AlâÂÂLi (3.19 à) is smaller than either pure lithium or aluminium.
AlâÂÂLi alloys are primarily of interest to the aerospace industry for their weight advantage. On narrow-body airliners, Arconic (formerly Alcoa) claims up to 10% weight reduction compared to composites, leading to up to 20% better fuel efficiency, at a lower cost than titanium or composites. AluminiumâÂÂlithium alloys were first used in the wings and horizontal stabilizer of the North American A-5 Vigilante military aircraft. Other AlâÂÂLi alloys have been employed in the lower wing skins of the Airbus A380, the inner wing structure of the Airbus A350, the fuselage of the Airbus A220 (where the alloys make up 24% of the fuselage), the cargo floor of the Boeing 777X, and the fan blades of the Pratt & Whitney PurePower geared turbofan aircraft engine. They are also used in the fuel and oxidizer tanks in the SpaceX Falcon 9 launch vehicle, Formula One brake calipers, and the AgustaWestland EH101 helicopter.
The third and final version of the US Space Shuttle's external tank was principally made of AlâÂÂLi 2195 alloy. In addition, AlâÂÂLi alloys are also used in the Centaur Forward Adapter in the Atlas V rocket, in the Orion Spacecraft, and were to be used in the planned Ares I and Ares V rockets (part of the cancelled Constellation program).
AlâÂÂLi alloys are generally joined by friction stir welding. Some AlâÂÂLi alloys, such as Weldalite 049, can be welded conventionally; however, this property comes at the price of density; Weldalite 049 has about the same density as 2024 aluminium and 5% higher elastic modulus. AlâÂÂLi is also produced in rolls as wide as , which can reduce the number of joins.
Although aluminiumâÂÂlithium alloys are generally superior to aluminiumâÂÂcopper or aluminiumâÂÂzinc alloys in ultimate strength-to-weight ratio, their poor fatigue strength under compression remains a problem, which is only partially solved as of 2016. Also, high costs (around 3 times or more than for conventional aluminium alloys), poor corrosion resistance, and strong anisotropy of mechanical properties of rolled aluminiumâÂÂlithium products has resulted in a paucity of applications.
Al-Li alloy powder is used in the production of lightweight sporting goods, including bicycles, tennis rackets, golf clubs, and baseball bats. Its high strength combined with reduced weight significantly enhances performance, speed, and maneuverability. It is also used in the automobile industry as body panels, chassis parts, and suspension components.
Aside from its formal four-digit designation derived from its element composition, an aluminiumâÂÂlithium alloy is also associated with particular generations, based primarily on when it was first produced, but secondarily on its lithium content. The first generation lasted from the initial background research in the early 20th century to their first aircraft application in the middle 20th century. Consisting of alloys that were meant to replace the popular 2024 and 7075 alloys directly, the second generation of AlâÂÂLi had high lithium content of at least 2%; this characteristic produced a large reduction in density but resulted in some negative effects, particularly in fracture toughness. The third generation is the current generation of AlâÂÂLi product that is available, and it has gained wide acceptance by aircraft manufacturers, unlike the previous two generations. This generation has reduced lithium content to 0.75âÂÂ1.8% to mitigate those negative characteristics while retaining some of the density reduction; third-generation AlâÂÂLi densities range from .
Key world producers of aluminiumâÂÂlithium alloy products are Arconic, Constellium, and Kamensk-Uralsky Metallurgical Works.