The Advanced Towed Artillery Gun System (ATAGS) is a towed 155 mm, 52-calibre howitzer that is being developed for the Indian Army by Armament Research and Development Establishment (ARDE), Tata Advanced Systems (TASL) and Kalyani Strategic Systems (KSSL), a subsidiary of Bharat Forge. The latter two are the development and manufacturing partners for the programme. ATAGS is named Amogh in Indian Army service.
The ATAGS project was started in 2013 by the Defence Research and Development Organisation (DRDO) to replace older guns in service in the Indian Army with a modern 155mm artillery gun. DRDO laboratory Armament Research and Development Establishment (ARDE) partnered with private players Bharat Forge, Mahindra Defence Naval System, Tata Power SED and public sector unit Advanced Weapons and Equipment India for this purpose.
With ARDE as the nodal laboratory, development is being assisted by Instruments Research and Development Establishment (IRDE), Vehicle Research and Development Establishment (VRDE), Proof and Experimental Establishment (PXE), Centre for Artificial Intelligence and Robotics (CAIR), and Defence Electronics Applications Laboratory (DEAL). It was part of the Development cum Production Partner programme (DCPP) of DRDO.
The development of the gun took about 4 years and is expected to be complete by March 2017. The delay in completion of the project was attributed to realization of ordnance and recoil system and supply issue with manufacturing of sub-systems. The gun is expected to start user trials in 2017 and production is expected to start in 2019.
It was first publicly showcased at 68th Republic Day parade on 26 January 2017. Both the prototypes of TASL and KSSL was part of the parade. For the first time, an indigenously developed howitzer gun, the ATAGS was included in the 21-gun salute alongside the British origin 25-pounder as part of the 76th Independence day celebrations. Two howitzer were included in the battery that fired the 21 gun salute. ATAGS is being fast-tracked by Indian Army for induction as of 27 September 2022.
The ATAGS has undergone several trials since 2016.
Armenian Ground Forces ordered 6 ATAGS from Kalyani Strategic Systems (KSSL) by August 2023. The guns were manufactured in KSSL's facility in Pune. They were delivered to Armenia by the end of 2023. As of October 2024, they intend to purchase additional 84 units after successful trials at different locations.
Post completion of trials of ATAGS in 2022, reports suggested that an initial order, split between TASL and Bharat Forge, for 150 guns would be placed at a cost of after releasing an RFP.
In March 2023, the Indian Ministry of Defence received a proposal worth over $1 Billion from the Indian Army for the purchase of 307 ATAGS. The order will be split at a ratio of 60:40 ratio. Kalyani Strategic Systems (KSSL) has emerged to be the lowest bidder followed by Tata Advanced Systems (TASL). However, TASL needs to meet the price bid of KSSL to receive the 40% order share. It was reported on 19 November 2024, Bharat Forge, the parent company of KSSL, is participating in price negotiations with the Ministry of Defence for the ATAGS contract. The deal, worth , was to be signed by 31 March 2025.
On 20 March 2025, it was reported that the Cabinet Committee on Security (CCS) has cleared the procurement of 307 ATAGS and 327 6ÃÂ6 gun towing vehicles to arm 15 artillery regiments at an estimated cost of around . The contract is expected to be signed next week. Following this, further orders could be placed later under the Field Artillery Rationalisation Plan. It was also reported that KSSL will manufacture 60% of the ATAGS order due to being the lowest bidder and TASL will manufacture the remaining 40%. The contract was signed on 26 March. The guns will replace outdated 105 mm and 130 mm guns of the Army. Over 65% of the gun's components are indigenous which includes major subsystems such as the barrel, muzzle brake, breech mechanism, firing and recoil system, and ammunition handling mechanism.
As of July 2025, the first gun system was ready for its product model test while the first regiment of ATAGS is to be raised by February 2027. The project has been termed as "an exemplary Mission Mode success" by the ARDE Director.
The gun consists of a barrel, breech mechanism, muzzle brake and recoil mechanism to fire 155 mm calibre ammunition with a firing range of 48 km. It has an all-electric drive to ensure reliability and minimum maintenance over a long period of time. It has advanced features like high mobility, quick deployment, auxiliary power mode, advanced communication system, automatic command and control system with night capability in direct-fire mode. The gun has a six round magazine instead of a standard three round magazine. The gun is two tons lighter than guns in the same category and is designed to provide better accuracy and range. It can fire six rounds in 30 seconds and is capable of firing five successive rounds in short duration.
It is compatible with C3I systems like Artillery Combat Command and Control System (ACCCS) called Shakti for technical fire control, fire planning, deployment management, operational logistics management of the Indian Army. ATAGS has auto loading and positioning system, auto laying system, muzzle velocity radar, safety interlocks and redundancy systems.The gun can fire up to Zone 7 bi-modular charge system.
The gun is towed by Ashok Leyland FAT 6ÃÂ6 truck and can change over from towing mode to firing mode within 2 minutes. The ATAGS artillery gun features shoot-and-scoot capability and can be deployed to fire a shell within just 90 seconds. It takes 2.5 minutes during the day and 3 minutes at night for the complete system to be prepared for action.
The Vehicle Research and Development Establishment developed the first mounted gun system technology demonstrator of India with shoot-and-scoot capability. It is a truck-mounted self propelled artillery variant with ATAGS mounted on an 8ÃÂ8 High Mobility Vehicle (HMV) developed by Bharat Earth Movers Limited (BEML). The overall system weighs 30 tonnes. The technology demonstrator was revealed in DefExpo 2022.
As part of this project, DRDO has developed technology related to ammunition handling cranes, stabilizers, armoured cabins, carrier vehicles, on-board power sources, and integrated small electronic controllers. MGS can operate in both desert and mountainous environments and has high mobility in terms of gradient, side slope, trench crossing, and cross-country capacity.
The official technical features of the gun includes: âÂÂ
The MGS system has undergone mobility and performance trials along with standalone firing trials of the armoured cabin in Balasore and Pokhran. Trials for the variant is expected to be concluded by 2026. On 7 June 2025, VRDE officially transferred the technology of the Mounted Gun System to Bharat Forge.
The Army has a projected requirement of 300 in the first phase, with the numbers expected to rise to 700âÂÂ800 in future. As of July 2025, DRDO is reportedly indigenising the remaining components of the MGS. Additionally, the Indian Army has also written to VRDE â the nodal development agency â to make the technology demonstrator available for extensive user trials in variable terrain and weather conditions.